Services
The certificate, the permits, and the maps and drawings behind both.
Applicant-side support across the Philippine EIS System, established by Presidential Decree No. 1586 and administered under DENR Administrative Order No. 2003-30 and its Revised Procedural Manual.
Permit finder
Not sure what your project needs?
Three quick questions for a first list of likely requirements.
Question 1 of 3
What kind of project is it?
All services
What we prepare.
Open any line for the detail, what you receive, and a recent example.
EIA and ECC
Delivered directly by EnviSoul.
IEE Checklist · IEE Report · EIS · PEIS
Project description, baseline characterization, impact assessment, and the Environmental Management and Monitoring Plan, filed through EMB's online system and supported through the review.
- Screening
- Baseline
- Impact assessment
- EMMoP
- Online filing
Recent ECC prepared for a limestone crushing facility, issued 2025.
Ask about thisMinor and major · EPRMP · PEPRMP
We classify the amendment under EMB's current guidance, prepare the EPRMP or PEPRMP with an updated impact assessment and management commitments, and carry the minor riders in the same application.
- Classification
- EPRMP
- PEPRMP
- Updated EMMoP
Recent Major ECC amendment with a 170+ page EPRMP and a nine-sheet figure suite, completed 2026.
Ask about thisScreening · CNC
We document the basis, prepare the CNC application, and advise on the operating permits that still apply.
- Coverage screening
- CNC application
Air · Water · Land · People
Ambient air and noise, water quality and hydrology, land use, slope and terrain, and socio-economic profile. Specialist studies where the project calls for them: aquifer vulnerability (DRASTIC), soil erosion and sediment yield (RUSLE), and blasting safety buffers.
- DRASTIC
- RUSLE
- Noise and vibration
- Sampling design
Recent Air and noise sampling design, slope and terrain analysis, and receptor safety radii for a 2026 EPRMP.
Ask about thisConditions · CMR · Monitoring
ECC condition registers, Compliance Monitoring Reports on the cadence the certificate sets, monitoring team coordination, and the record behind each commitment, quarter after quarter.
- Condition register
- CMR
- Monitoring
Permits and compliance
Delivered with VerdeLaya under one scope and one point of contact.
Generator sets · Furnaces · Crushers
Source inventory, Engineer's Report, AP-42 and EMEP emission estimates, environmental management plan, preventive maintenance schedule, and OPMS filing.
- Source inventory
- Engineer's Report
- AP-42 and EMEP
- OPMS filing
Recent Permit to Operate issued 2026 for a solar plant's standby generator sets.
Ask about thisSeptic systems to full treatment plants
Wastewater source and outfall review, Engineer's Report, water balance, treatment facility drawings, receiving water context, and laboratory coordination.
- Water balance
- Engineer's Report
- Treatment drawings
- Laboratory coordination
Recent Application packages and drawing sets delivered for a crushing facility and a solar power project, 2026.
Ask about thisWaste streams · HWMS package
Waste stream characterization, process mass balance, hazardous waste management plan, contingency and emergency plan, and the indexed HWMS package.
- Mass balance
- Management plan
- Contingency plan
- HWMS
Recent Seventeen-part registration package delivered for a crushing facility, 2026.
Ask about thisDesignation · Training · COA
Designation, training and Managing Head orientation coordination, and COA applications. Retained PCO service where a consultant is separately appointed and accredited for the establishment.
- Designation
- Training coordination
- COA application
Quarterly · OPMS submission
Quarterly Self-Monitoring Reports and Compliance Monitoring Reports: module preparation, laboratory coordination, notarization, and on-time OPMS submission.
- SMR
- CMR
- Notarization
- OPMS
Recent Self-Monitoring Report filed with notarized supporting documents, 2026.
Ask about thisOPMS · CRS · HWMS · NWRB · MGB
OPMS, CRS, and HWMS enrolment; NWRB water permit assistance; MGB submissions; CCO registration; and coordination with LGUs, BFP, Coast Guard, and CENRO where projects require it.
- OPMS
- CRS
- NWRB
- MGB
- CCO
Maps, drawings, studies
Produced in-house and issued in the formats reviewers use.
QGIS · A3 figure suites
Location, topographic base, study and impact area, vicinity with receptors, site development, slope and elevation, land use and ECA overlays, sampling stations, and safety-radius maps. Also protected area, Ramsar, and cultural property proximity analyses, and lot boundary digitization from titles.
- QGIS
- Receptor mapping
- ECA overlays
- Proximity analysis
Recent Nine-sheet A3 figure suite for a 2026 EPRMP.
Ask about thisDWG · DXF · Signed PDF
Treatment facility plans and elevations, wastewater line layouts, oil-water separator design, and multi-sheet mechanical plan sets, issued under the seal and signature of the responsible PRC-licensed engineer.
- Treatment facilities
- Line layouts
- Mechanical plan sets
Recent Ten-sheet mechanical plan set for a crushing facility, 2026.
Ask about thisBalances · Estimates · Feasibility
Signed and sealed Engineer's Reports, water and mass balances, emission estimates, DRASTIC and RUSLE studies, and mining feasibility and EPEP documentation for MGB.
- Water balance
- Mass balance
- Emission estimates
- EPEP
How we work
Assess, prepare, coordinate, track.
- 01
Assess
Site visit, records review, and permit baseline: what exists, what is missing, and what the law actually requires.
- 02
Prepare
Studies, Engineer's Reports, plans, balances, maps, and forms: drafted, signed, notarized, and indexed to the agency checklist.
- 03
Coordinate
Authorized filing and follow-through with the regulator, with every submission and response documented.
- 04
Track
Milestones, certificate and permit conditions, and monitoring obligations tracked through issuance, and after it.
Deliverables you can hold
- A written scope and requirements checklist
- An organized, submission-ready document set
- A milestone and action tracker
- Map-based site evidence where applicable
Three ways to engage us
- EIA consultancy
ECC applications, amendments, Certificates of Non-Coverage, and the studies and maps behind them, delivered directly by EnviSoul.
- Permitting package
Air, water, hazardous waste, and PCO permitting delivered with VerdeLaya under one scope and one point of contact.
- Retained compliance
Quarterly SMR and CMR preparation, ECC and permit condition tracking, and renewal management, sustained over time.
FAQ
Questions we hear most.
We prepare the documentation Philippine projects need to secure an Environmental Compliance Certificate, obtain the permits that follow it, and keep both in good standing. That covers ECC applications and amendments, Certificates of Non-Coverage, baseline studies, post-ECC compliance, GIS maps, and CAD drawings. Permits to Operate, Discharge Permits, and hazardous waste registration are delivered with our affiliated firm, VerdeLaya.
A short description of the project or facility, its general location, the current status of the project, and any environmental documents or permits you already have. That is enough for us to identify the relevant requirements and information gaps.
We do not publish fixed prices. Every engagement starts with a scope and requirements review, and a quotation follows once the work involved is clear.
It depends on the project type and size. Projects covered by the EIS System apply for an Environmental Compliance Certificate; projects not covered get a Certificate of Non-Coverage instead. Only DENR-EMB decides which applies, based on the project description (DENR DAO 2003-30, Sections 3 and 5). We can review your project and prepare the right application.
An ECC covers the project as a whole and is secured before you start, under the EIS System. A Permit to Operate covers specific equipment that emits air pollution, such as a generator set, and is issued under the Clean Air Act (DENR DAO 2003-30, Section 3; DENR DAO 2000-81, Rule XIX). Many businesses need both, as separate applications.
No. DENR-EMB and the other regulators remain the sole evaluating and issuing authorities, and we do not control agency timelines. What we promise is complete, correct, defensible work, prepared against the current regional checklist and supported through the review.
VerdeLaya Environmental Consultancy Services is our affiliated firm in General Santos City, led by the same principal engineers. It delivers air, water, hazardous waste, and PCO permitting, so a client gets the ECC, the permits that follow it, and the maps and drawings under one scope and one point of contact.
Yes. Issued instruments, signed reports, stamped drawings, and filed monitoring reports can be presented during evaluation, subject to client consent. Client names and reference numbers are kept off this public site, so ask us for the full portfolio.
We are based in General Santos City, Region XII, and support projects across the Philippines. Share your project location and we will confirm availability for your exact site.
Bring the site, the documents, and the questions.
Start with a conversation about the project. You receive a written scope, a requirements checklist, and a clear sequence to filing.